Linux support in Flashpoint is currently experimental due to a lack of maintainers. This page describes the current state of our Linux support.
- 1 Release
- 2 Latest Stand-Alone Packages
- 3 Troubleshooting
- 4 Technologies
These are experimental packages for specific Linux distros. If you don't see a package for your system here, please use the stand-alone package instead! If you can help update these packages, please visit the Discord server and join #development-chat. If you need assistance with installing or playing, visit us at #flashpoint-mac-linux-help.
- Flashpoint Infinity 8.2-2 .deb (Debian / Ubuntu):
- PPA Repository - In Consideration.
- AUR package currently not available - please use the stand-alone package instead
Debian Installation Procedure
- Download and extract the .7z file above into any folder - /Downloads is fine.
- It's recommended to run the .deb from the command line so the install progress is clear. From the folder where the .deb is:
sudo apt install ./flashpoint-infinity_8.2-2_amd64.deband it will install. The install can take a while as it has wine and php as dependencies. Graphical installer (from just double-clicking in the .deb) might not show much info as dependencies are being installed and so it might appear frozen.
First Run Procedure
After installation, start Flashpoint Infinity either from the command line as
flashpoint-infinity or from your desktop environment (it should be listed in Games). At first run you'll get two popups: click 'Yes' on 'You must install the Upgrade on the home screen', and then 'yes' again to 'The Flashpoint folder is not set or is invalid. Do you want to choose a folder?'. Anywhere in your home directory is fine to install it (you need write access to it). Click 'yes' again to 'Is this correct?' if the directory is correct. You should see the download/extract progress, and then a prompt to restart. When it comes back up after restart all (60k!) games should be visible.
It's recommended to use the native Basilisk for HTML5. To enable this change go to the config tab and in the Native Platforms drop-down, select the box for HTML5. For Flash it's still recommended to go through Wine (this is the default), though native Flash projectors can be enabled in the Native Platforms drop-down too if desired.
On the first time using Wine to launch a game, it does some configuration so it could take some time.
Flash, HTML5, and Shockwave games run well generally. More about other platforms below.
Debian Update Procedure
If you are updating the Debian package from a previous version, first back up your favorites and save data if you'd like to keep them. Then run the .deb file same as above. Once the update is completed, open the launcher and click on Download, which will install the new Flashpoint folder. Once it restarts the update is complete and all features of this version should be available.
Notes about the Debian package
- The 'Flashpoint folder' above can go anywhere the user can write to - home is a convenient place for it
- It installs binaries into /usr/lib/flashpoint-infinity/, and /usr/bin/flashpoint-infinity links to the launcher
- Extreme games are disabled by default in version 8.2-1 which was up from October 23, 2020 until November 7, 2020. To enable them or change other configuration options, edit
- Debian source package: https://bluepload.unstable.life/flashpoint-infinity82-2debsrc.7z. The source lives as a branch 'debian' off of Launcher's /master (on one of Launcher's forks). This is the commit that is tagged "Infinity-8.2-2"
Latest Stand-Alone Packages
- This is the latest experimental stand-alone package of Flashpoint Infinity (10.0) for Linux, created on July 26, 2021. Currently everything is going through Wine.
- sha256 hash 9f23efb4c4655cf1e21bedf4e5396bf005b22bed4f6604256a76276b936de003
- qemu-system-i386 required for Apachae gamezip server/forwarder
- Requires GLIBC 2.29+ for the time being (Debian stable/Ubuntu 18.x/19.x affected)
- Be sure to run from the Launcher directory
- PHP and QEMU are not killed correctly upon exit. Example launch script to handle this.
$ cat fp #!/bin/bash ./flashpoint-launcher killall php killall qemu-system-i386
- This is the previous experimental stand-alone package of Flashpoint Infinity (8.1) for Linux, created on July 4, 2020. Currently everything is going through Wine.
- Download and extract the .7z file.
- Install PHP and the 32-bit version of Wine if you do not have them. See Wine installation instructions below.
- Change to the Launcher folder and run the flashpoint-launcher binary
Ultimate / Core: https://synthagen.net/Flashpoint9_Ultimate_Linux.tar.gz
- Contains only the client/server files. You will have to download the games separately
- After  Ultimate or Core, extract the .gz file to the folder where you extracted Flashpoint
- Move the Legacy/htdocs folder to Legacy_Linux/htdocs
- Run Server_Linux/run_server.sh
- Run Launcher_linux/flashpoint-launcher
- Still needed if you want to make some of the platforms native
- Added 10.0 Infinity package
- Added Core/Ultimate standalone package for 9.0 based on 8.1 Infinity standalone
- Updated .deb to Flashpoint 8.2-2 Infinity
- Added native executables for Flash and HTML5
- Replaced modified Flash Projectors with the unmodified ones
- Fixed extreme games option being disabled in config.json
- Updated .deb to Flashpoint 8.2-1 Infinity
- Updated to Flashpoint 8.1 Infinity
- Updated to Flashpoint Launcher 9.0.2
- Updated to Flashpoint 6.3
- Bundled WIP Launcher with better Multi-Platform Support
- Proper linux argument escaping (Supersonic RC works now, yay!)
- SPR games automatically use port 22500 (Hacky, may be removed later)
- Wine will always (and only) be used for running .exe files (even if use Wine is turned off in Config)
- .bat files will always run their .sh equivalents (even if use Wine is turned on in Config)
- Windows execs are mapped to native execs (if existing), so Windows game XMLs should work out the box. (See execs.json)
- Can mark a platform as 'native' in Config, will force native execs to be used instead of Windows execs even if use Wine is turned on.
- If no native execs are available (like Shockwave) then it will fallback to running the Windows exec with Wine.
- Added native Basilisk support files
- Updated SPR files
- Updated router.php
- Added new SPR version (see update-spr.sh) and Shockwave XMLs
- Added interim Launcher hack to make Shockwave games that use SPR work properly
- Made the save manager scripts use a valid interpreter (/bin/sh)
- TODO: they still need further work/testing
2019-07-21 and prior:
- Configure Flash games to run using the Windows player, flashplayer_32_sa.exe
- The Linux flash player suffers from too many graphical glitches
- Requires Wine to be installed and enabled to play
- Updated JDK to version 8u212
- startJava.sh instructions and script updated
- Made startJava.sh executable
- Added support for Authorware Platform
- Adds Linux versions of the Save Manager scripts
- Adds a "Flashpoint" shortcut (replacing the Windows version)
- Adds Flashpoint 6.2 games
- Removed the game logos, as in Flashpoint Infinity 6.2 for Windows
- Removed the Wineprefix because it was not used
- Allow the launcher to automatically start/stop the flashpoint server on Linux
- Add gamezip support. The gamezip program does not run in wine but does work natively but the launcher doesn't know that
- Test Unity 2.x and 3.x games
- Fix startUnity.sh, since it modifies K-Meleon's config, which is no longer necessary
- AMF support for games like Neon Rider for the community levels
If the Flash Player crashes immediately when launched, there are a few possible solutions:
- Replace our hacked Flash projector with the original, unhacked Adobe Flash projector. Follow these steps:
- Download the projector from here
- In your Flashpoint folder, open
- Replace the
flashplayer_32_sa.exefile with the one you downloaded.
- Remove wine-dxvk from your system. This causes problems with the Flash projector on some computers.
Flashpoint Infinity, like its Windows counterpart, it uses
router.php as a proxy server. But unlike Windows, Linux provides native ways to set per-application proxy settings, so no equivalent to the Flashpoint Proxy library is used. On Linux, each application is simply told via environment variables to use
localhost:22500 as a proxy server. For example, before Flashpoint Launcher opens the Flash projector, it sets the
http_proxy environment variable to
The Flashpoint FAQ contains a list of all web game technologies ("Platforms") supported in the Windows version of Flashpoint. The Linux version currently supports a subset of these platforms. This is explained in detail below.
- Flash: Supported through Wine by default. Although a Linux Flash Projector exists, it suffers from graphical glitches on many systems. If you'd like to try your luck with the native projector, then either turn off use Wine, or tick it as a 'Native Platform' on the Config page.
- Shockwave: Supported through Wine.
- HTML5: Supported natively through the Basilisk browser. To update Basilisk, download it from here and extract it such that the executable is located at
FPSoftware/Basilisk-Portable/linux/basilisk. By default, Basilisk will store its configuration in the location defined by
XDG_CONFIG_DIR, so Flashpoint uses a shell script to set the configuration location. A pre-configured copy of Basilisk, along with the shell script, is packaged and also available here. This text file describes Basilisk's configuration.
- Java Applets: Supported natively using the JDK.
- Unity Web Player: Supported through Wine. Unity 2.x and 3.x games may not work; this needs further testing.
- PopCap Plugin: Supported through Wine.
- Authorware Web Player: Supported through Wine.
- GoBit Plugin: Supported through Wine.
- Silverlight: In the past, Pipelight allowed Linux users to use Silverlight, but the repository is no longer available for most Linux distros. Moonlight was another option, but is also no longer available. Attempts to use Silverlight in K-Meleon using Wine have failed.
- 3DVIA Player: A previous tester received this error, which crashed K-Meleon:
Error: Access was denied while trying to open files in your profile directory. We need another tester to help us narrow this down.
- 3D Groove GX: When the http_proxy variable is set, Groove Player downloads but fails to load the file. Maybe the registry method described here would work better, but this needs to be tested. Two of our testers received the following set of errors: 1 2 3
- ActiveX: The most promising method so far was to install Internet Explorer 8 and each ActiveX plugin into the Wine prefix, but this needs considerable work.
A lot of work has been done to allow Flashpoint Launcher to support Linux, but there's a lot of room for improvement. This Trello post outlines some potential improvements.
Most games rely on technology only available on Windows. A lot of these however can be run through Wine. If there is no native executable, or you have the Native Platform option unticked for the game's platform then the launcher will run it through Wine.
You may choose to use the native versions, in which case tick the platform under Native Platforms in Config.
If you wish to play games that rely on Wine, be sure to install the 32-bit version of Wine. There are links below to distro specific install guides:
- Ubuntu - https://wiki.winehq.org/Ubuntu
- Debian - https://wiki.debian.org/Wine#Installation_on_Debian_Jessie_and_newer
- Arch Linux - https://wiki.archlinux.org/index.php/Wine#Installation
Update: As of Wine 6.0-rc1, Shockwave appears to be working again. If you are on 5.22, keep an eye out for an update from your distribution.
As of Wine 5.22, the Shockwave wrappers are no longer launching. Avoid updating Wine until a fix is found.
Some work has been done on getting Pipelight working with flashpoint. Currently the pipelight plugin itself is figured out and shockwave has been tested working, but every NPAPI plugin has it's quirks and they have to made into pipelight versions one at a time.
All in one package with instructions: https://mega.nz/file/38ZWBYQK#l-Wro8amBZ72iziegOFVOLrU_N2QwYFZQfsZ3m3naG0
Unity gives "Failed to update Unity Web Player"
- New Launcher features from Master
- Splash Screen while loading (no half loaded XMLs when browsing anymore)
- Search Overhaul
- Background Services in Developer (Restart/stop/start the Router on the fly)
- Removed 'Use Wine' option, effectively enabled by default, use 'Native Platforms' to use native execs instead.
- Partial ActiveX support, requires heavy testing. ThwartPoker, Butterfly Escape, Big City Adventure, Astro Avengers 2 and HamsterBall do not work yet.
- Updated startJava.sh to support multiple command-line parameters: replace
"$@"on line 8